To know and understand how to turn your vehicle around on the road
To be able to safely turn your vehicle around on the road, if no roundabout or side street is available.
- To be able to turn your car safely in the road
- Whilst it is often easier and safer to turn your vehicle around by a U-turn if the road is wide enough. Or on a roundabout, or by reversing into a side road. These methods are not always practical. In these situations you should know how to safely turn your car around in the road.
- When doing this try not to touch the kerb with your wheels as it will mean that part of your car is now over the pavement. Generally move the car slowly but steer the wheel quickly.
- Clutch control is important here. Having set enough gas to allow for the camber in the road. At the low speed which you should do this manoeuvre, you control the speed of your car with the clutch.
- To be observant at all times when turning in the road
- To understand any potential hazards in turning your car on the road
This is no longer tested as a manoeuvre but you should be familiar with how to do it.
While this is no longer a test manoeuvre being able to control your vehicle in a tight space is a valuable skill.
Always check all around you before attempting to turn your car in the road. Check your blind spots for pedestrians and cyclists as well as other cars.
Avoid becoming an obstruction to other drivers, do not take too long to complete the turn.
Always chose a place to turn that is safe to do, consider:
- Is this a legal place to turn
- Is there plenty of room to turn
- Is there any obstruction on the road
- Is there a lot of pedestrians on the pavement nearby
- Are there lampposts or trees near the kerb on either side of the road
- Is there a camber on the road
- With the gas set, bring the clutch up to make it go faster.
- Clutch down and then brake if needed to make it go slower.
Before you turn:
- Stop on the left side of the road
- Select first gear and prepare to move
- Check all around you including your blind spots
- Give way to any passing vehicles
Moving across the road:
- Move forward slowly in first gear, turn your steering wheel to full right lock
- You should aim to get your car at a right angle across the road
- Just before you reach the opposite kerb begin to steer to the left
- With the gas set bring the clutch up to make it go faster
- As you near the kerb, push down on the clutch and use the footbrake to stop
- If there is a camber on the road you may need to also use the parking brake.
- Select reverse gear
- Check all around you
- Reverse slowly across the road turning the steering wheel as far to the left as possible
- Look over your right shoulder as the vehicle nears the kerb and turn your steering wheel to the right
- Push down on the clutch and use your footbrake
- Your wheels should be pointing to the right
To drive forward:
- Select first gear
- Check the road is clear and drive forwards when safe to do so.
When turning in the road always:
- Check the road is clear in both directions before beginning
- Keep your car moving slowly whilst steering
- Use your parking brake if there is a camber to the road
- Be considerate to other road users
- Observe carefully at all stages of the manoeuvre, especially in your blind spots
- If moving backwards look backwards through your rear windscreen
It is often easier to turn your car around at a roundabout or side street, but this is not always possible. It is important that you can turn your car around in the road. You will not be asked to do this during your practical driving test. But may have to if you take a wrong turn.
Always be considerate of other road users and pedestrians. Avoid turning in a road that is very narrow or with lampposts or trees very near to the kerb.
Observe all around you at every stage of the manoeuvre.
You should be able to know:
- When to turn and when to go round using a side road or roundabout
- How to turn and what risks might be involved
- Where to look when doing this
Driving The Essential Skills: Section(s) 9